Equipment 72 Cores to 144 Cores Outdoor Fiber Optic Cross Connecting Cabinet
Outdoor Cabinet(no jumper-fiber,new model)
Size of the cabinet house (H*W*D) : 960mmx525mmx320mm
- Trunk Optical cable splice 12core fiber core.
12 core splice&distribution tray (SC/FC) 2set
2.Place for distribution cable to splice and store.
12sets Splice&storge integrate trays use for the feeder cable to splice with the pigtail,
Splice&storge integrate tray the right part use to splice cable and the left part use to storage.
The connector of the pigtail could be fixed on the fan size plate.
The drawer designed plate could make sure the use of the pigtail and no need to move the whole tray.
3. Area to install the LGX PLC splitter
12 standard installation 1:8 LGX Plc splitter ports,could be installed 1:8 or 1:16 LGX type PLC splitter
1. General
Outdoor Cabinet(no jumper-fiber,new model) is a type of interface device for outdoor fiber optic trunk cables and wiring connections, the fiber can be achieved directly connecting and wiring connections and cross-connections.
Product Features:
- Cabinet body is made of high strength polyester SMC(Stainless steel) material, good corrosion resistance, aging resistance, can withstand severe weather. Can change and adapt to the harsh working environment, the service lifetime up to 20 years.
- Use the position lock to make sure the safe of the cabinet.
- Realize the connection and the storage of the optical fiber.
- Make sure the reliable cable fixing and the grounding device
- Could fix the FC,SC adapter in the Splice&storage integrate tray, and could use the insert type PLC splitter to distribution the optical fiber.
- Face to face to distribution and dispatch the optical fiber.
Main Technical Parameters:
1.Working condition
Environment temperature:-20ºC~+60ºC
Storage temperature:-25ºC~+55ºC
Relative Humidity:≤95%(+40ºC)
Atmospheric pressure:70Kpa~106Kpa
2.Photoelectric Property
Connector Insertion loss (including the insertion,swaps ,repeat)≤0.2dB
Return loss :FC/PC≥45dB FC/UPC≥50dB FC/APC≥60 Db
Plug durable life more than 1000 times.
3.Cabinet house features.
(1) Chassis sealing protection level: IP65 standard GB4208-level.
(2) Static load capacity of the housing shell cover ≥ 980N, side surfaces ≥ 500N, hinge ≥ 200N.
(3) Chassis grounding and high voltage protective insulation resistance >1000MΩ(500V/DC)
(4)Tank pressure protection between the ground and the chassis pressure: ≥ 3000V (DC)/1min, no breakdown, no ARC.
Size and capacity.
- Size of the cabinet house (H*W*D) : 960mmx525mmx320mm
- Max capacity 144core
Installation
Cement pedestal Dimensions(L × W × H) 590 mm × 420mm × 300mm
1.The external dimensions of the cement base (length х width х height) are 590mmх420mmх300mm,
and a hole line of 405mm*170mm*300mm is left in the center of the foundation.
2.Cement pedestal Dimensions (L × W × H) 590 mm × 420mm × 300mm, screw is 55 mm
higher than the water level (expansion bolts can also be fixed).
3.Cabinet will be placed on cement base, with fixed foot screw embedd-ed in alignment place,
and then lock the screw, the cabinet should be maint-ained vertical with cement base level
when installed.
Use and Operate
1.Open the cabinet
Use the special key to open and close the door.
2.Optical fiber distribution principle
Using the optical cable and optical fiber cross-connect mode.
Trunk cable fuse splice with the pigtail which coiled inside the distribution splice tray
Feeder cable splice with the pigtail which coiled inside the Splice&storge integrate tray.
Use another patch cord to connect the LGX splitter with the trunk cable fused connector.
While need to distribution the cable.only need to insert connector of the feeder cable to the output side of the LGX plc splitter.
3.Optical cables turnover and fasten
Trunk cables from the bottom of the cabinet,strip the outer protective sheath ,the strip length should be according to the situation,then use the hose clamp to fix the cable on the fixing part ,late then fasten the intensified cable core on the fixed axis.
4.Fusion splicer
Remove the cover on the fusion module, insert the optical fiber protective sleeve into the fiber core before fusion, then splicing the optical fiber core end and the pigtail fiber core end according to the optical cable fusion splicing process, and then coil it into the fusion splicing tray of the fusion module. . The spliced pigtails are introduced into the wiring tray of the fusion-matching integrated module, and inserted into the optical splitter adapter in the middle of the corresponding box.
Order Guide:
| Cabinet capacity |
Outline dimension(H*W*D) |
Splice&distribution integrated module tray |
Splice&storage integrated module tray |
PLC splitter |
Installation pitch-row |
| 144 fiber core |
960x525x320mm |
2disc |
12 pcs |
12 sets |
455x165mm |
| 288 fiber core |
1450x750x320mm |
4 disc |
24 pcs |
26 sets |
610x155mm |
| 576 fiber core |
1450x750x620mm |
8disc |
48 pcs |
52 stes |
610x455mm |
){kind=link}
){kind=link}